Electronic Assembly Materials

ITW EAE product lines apply a wide range of materials into the assembly of electronics and industrial processes and applications. These include solder, pastes, fluxes, aqueous based chemistries, and solvents, including paste fluxes, adhesives, underfills, and encapsulants, thermal interface materials (TIMs), electrically conductive (as well as isolative) materials, and many others, with speed, precision, and in controlled environments.

Adhesives

Adhesive materials (e.g., SMT adhesives for holding passive SMD components in place during wave soldering) are printed and dispensed accurately and precisely with MPM printing machines (via stencils) and CAMALOT® dispensing systems using the range of dispensing pumps (such as auger pumps) available, depending on the application requirements.

Flux

Liquid Fluxes of different types may be applied by various techniques to solderable surfaces, such as paste fluxes (stencil printed onto bare PCBs with MPM® printers or dispensed onto selective areas via CAMALOT® dispensing systems).  All ITW EAE equipment is compatible with the various types of fluxes available, including No Clean (NC), Water Soluble (WS), Rosin Mildly Activated (RMA), and Rosin Activated (RA) that are used in the full range of semiconductor and board assembly processes.

Lead-Free

ITW EAE’s assembly technology solutions are designed to excel in handling lead-free soldering technology. Lead-free alloys in solder paste typically have a tighter process window than traditional lead-bearing (e.g., SnPb) solders.

No Clean

‘No-clean’ solder pastes and fluxes have their own unique characteristics and process requirements. Although they are intended to be left on the PCB assembly after processing, their ‘low-solids’ content requires precise, careful temperature profiling so that the active cleaning, wetting, and protective agents in the flux will have the opportunity to perform their function and form a good solder joint before they boil off.

Solder

Solder is still the primary means of attaching electronic components to a PCB to create a working electronic assembly. Whether solder is applied in a paste form or as a molten liquid, ITW EAE provides proven solutions for printing, dispensing, reflow soldering, wave soldering, and cleaning soldered assemblies.

Solder Paste

Solder pastes in every alloy type, flux chemistry, and particle size are precisely and accurately stencil printed with MPM® printers and dispensed in semi-liquid form with CAMALOT® dispense systems. Accurate application, in terms of location and volume, is critical to forming good solder joints, since solder paste is by volume only 50-55% metals.

Solvents

A wide range of solvent types are used in electronics manufacturing, from simple DI water to alcohols such as IPA to more aggressive and complex formulations. Solvents are used for cleaning and are also found in printed and dispensed electronic materials.

Water Based Chemistries

Water-based chemistries are used in batch and in-line cleaning of PCB assemblies, in fluxes and solder pastes, and in other electronic materials such as masks and coatings and dispensed products such as adhesives.