Electronic Assembly Printers

Momentum HiE Printer

Overview

The MPM® Momentum® Hi-E (for High Efficiency) is a single-rail printer with servo motors, rather than stepper motors, driving the Vision system’s X, Y, and Z axes. Faster than steppers, servos drive the vision gantry at higher speed and thus increase throughput and cut cycle time, making the Hi-E faster than the base Momentum® or Momentum+.

Benefits and Features

Higher Speed, Higher Throughput

Machine vision inspection occupies a large time-chunk of each print cycle, and most of that is, moreover, the physical motion of system components. Speed up that motion and you shave away cycle time, and the savings are cumulative.

Proven Momentum Series Accuracy and Performance

Wet Print accuracy of 20µm@6σ, Cpk ≥ 2, with 6σ capability designed in and independently verified. MPM Momentum series printers are fast, precise, and highly reliable, with performance unmatched by any other printer in their class.

Advanced Inspection and SPC Tools

Momentum incorporates expanded 2D inspection capabilities, featuring both MPM’s patented contrast and texture-based technologies with BridgeVision® and StencilVision™.  Powerful SPC program tools combine with these advanced vision and data acquisition technologies to facilitate maximum process analysis and optimization.

Automatic Pin Placement

Automatic Support Pin Placement automatically places support pins in a software programmable pattern simplifying both initial setup and product changeover. It ensures quick, easy and repeatable product changeover.

Benchmark User Interface

Easy to learn and use for the average operator, Speedline’s Benchmark software is powerful yet intuitive, and facilitates rapid setup, assists with operational tasks, and makes changeover quick and easy.

Enhanced Technology

EnclosedFlow Print Head

The EnclosedFlow print head delivers superior volume/yield on fine pitch pads. Print fine features such as 01005s and 0.3mm pitch CSPs with up to 50% greater volume and 25% lower deviation than squeegee blades! EnclosedFlow ensures optimal aperture filling for fine pitch devices and crisp uniform printing with less waste.

Innovative EdgeLoc Tooling

EdgeLoc uses software-controlled pressure for optimal board holding force, automatically adapts to the programmed board thickness, and firmly holds the board without the use of top clamps

Camalot Inside

Improve your production line’s flexibility and productivity with Speedline’s Camalot Inside featuring Camalot dispense technology.

RapidClean

RapidClean is MPM’s high-speed stencil cleaning solution that improves cleaning performance and cuts cycle time. RapidClean provides precise wet-dry wipe transition and exceptional cleaning results with its paper over plenum design, venture vacuum, and patented roller solvent bar delivery system.

Increased Yields with RapidView Inspection

Built on our patented optics technology, RapidView™ delivers high-speed 2D inspection with device-level SPC reporting. It’s up to three and half times faster than our standard system, increases Field of View 4x, and works in conjunction with our GerberEZ Teach system.

Paste Height Monitor

The paste height monitor is a robust solution that allows the user to monitor the paste roll size on the front squeegee blade during a print stroke.

PrinTrack

MPM’s PrinTrack adds traceability, data harvesting, and reporting to your printing process.  With PrinTrack, you always have an easily-accessible, comprehensive history detailing how your product was printed, when it was made, the process parameters used to print it, and all pertinent information that can be used to track products or troubleshoot the process if needed. A flexible Web reporting interface can be user-configured to produce traceability reports. PrinTrack is a portal to the Industry 4.0 evolution; it features open architecture for seamless integration, a standard method of connecting to MES and ERP systems, and its open architecture makes it highly compatible and expandable to factory-wide Track, Trace, and Control systems.

SPI Print Optimizer

The SPI print optimizer communicates with the external Solder Paste Inspection (SPI) system to continuously monitor and auto-correct X, Y, and Theta registration ‘on the fly’ to stay on target and prevent print defects.

Open Apps

MPM’s Open Apps feature is an open architecture source code which provides customers and third parties the capability of developing custom interfaces in support of Industry 4.0 initiatives and Manufacturing Execution Systems (MES).